2009 Dodge Ram 2500 Recalls

What To Do If Your Ram 2500 Has Been Recalled

The following recalls have been announced by Dodge, so if you own a 2009 Ram 2500 take action immediately to get your automobile fixed. Interested in how this information is collected? Read more about recalls and the NHTSA.

1. Call Dodge to get more information. Verify that the cost of repairs will be covered free of charge.
2. Setup an appointment with a local authorized mechanic to schedule your maintenance.
3. Keep up to date with recalls for your vehicle by following this page.

Recent 2009 Ram 2500 Recalls

• STEERING:LINKAGES:TIE ROD ASSEMBLY Recall for 2009 Dodge Ram 2500

  • Recall Announced JULY 06 2011
  • NHTSA Reference #11V350000
  • Number Affected 242,780

  Summary: Chrysler is recalling certain model year 2008-2011 Dodge Ram 2500/3500 4X4, manufactured from February 14, 2008, through March 28, 2011; model year 2008-2011 Dodge Ram 3500 cab chassis 4X2, manufactured from February 14, 2008, through March 28, 2011; and model year 2008 Dodge Ram 1500 mega cab 4X4, manufactured from February 14, 2008, through August 15, 2008, because the left tie rod ball stud may fracture. This condition tends to occur during low speed parking lot type maneuvers when the customer is making a tight turn. Additionally, model year 2003-2008 Dodge Ram 2500/3500 vehicles may have received the affected tie rod assembly as a replacement part during normal service.

  Consequence: This condition could result in the potential loss of directional stability in the left hand front wheel, increasing the risk of a crash.

  Fix: Dealers will inspect the tie rod ends for relative orientation and replace the left outer tie rod as required and perform a front end toe alignment as needed. This service will be performed free of charge. The safety recall began on October 3, 2011. Owners may contact Chrysler at 1-800-853-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #11V350000 »

• STEERING:LINKAGES:TIE ROD ASSEMBLY Recall for 2009 Dodge Ram 2500

  • Recall Announced DECEMBER 24 2010
  • NHTSA Reference #10V657000
  • Number Affected 15,271

  Summary: Chrysler is recalling certain model year 2008-2011 Dodge Ram 4500 and 5500 vehicles. These vehicles may experience a weakening and fracture of the left ball stud on the tie rod resulting in the potential loss of steering.

  Consequence: Loss of steering control of the vehicle could increase the risk of a crash.

  Fix: Chrysler will notify owners and replace the left outer tie rod free of charge. The safety recall began on March 7, 2011. Owners may contact Chrysler at 1-800-853-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #10V657000 »

• SERVICE BRAKES, HYDRAULIC Recall for 2009 Dodge Ram 2500

  • Recall Announced JANUARY 11 2010
  • NHTSA Reference #10V009000
  • Number Affected 20,045

  Summary: Chrysler is recalling certain model year 2010 Chrysler sebring; Dodge avenger and nitro; Jeep liberty, commander and grand Cherokee; and model year 2009-2010 Dodge Ram truck. These vehicles may have been built with an improperly formed or missing brake booster input rod retaining clip.

  Consequence: This could result in brake failure without warning which could cause a crash.

  Fix: Chrysler will replace the brake booster input rod retaining clip free of charge. The safety recall is expected to begin during February 2010. Owners may contact Chrysler at 1-800-853-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #10V009000 »

• EQUIPMENT:ELECTRICAL:AIR CONDITIONER Recall for 2009 Dodge Ram 2500

  • Recall Announced MAY 08 2009
  • NHTSA Reference #09V158000
  • Number Affected 36,793

  Summary: Chrysler is recalling 36,793 MY 2009 Dodge Ram light duty pickup trucks equipped with manual temperature control (mtc) only. The software programmed into the heating ventilation and air conditioning module may cause the windshield defrosting and defogging functions to become inoperative.

  Consequence: This can decrease the driver's visibility under certain driving conditions and result in a crash without warning.

  Fix: Dealers will reprogram the hvac module free of charge. The recall is expected to begin on or before August 3, 2009. Owners may contact Chrysler at 1-800-835-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #09V158000 »

• VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR Recall for 2009 Dodge Ram 2500

  • Recall Announced MARCH 13 2009
  • NHTSA Reference #09V084000
  • Number Affected 65,896

  Summary: Chrysler is recalling 65,896 MY 2008-2009 light and heavy duty Dodge Ram pickup trucks. The windshield wiper module motor assembly may be susceptible to water intrusion that could result in partial or complete loss of windshield wiping capability.

  Consequence: When the wiper system fails, the operator will have reduced visibility which could result in a crash.

  Fix: Dealers will replace the wiper module assemblies with vented wiper motor housings free of charge. The safety recall began on August 17, 2009. Owners may contact Chrysler at 1-800-853-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #09V084000 »

• VISIBILITY:WINDSHIELD WIPER/WASHER Recall for 2009 Dodge Ram 2500

  • Recall Announced MARCH 13 2009
  • NHTSA Reference #09E009000
  • Number Affected 1,364

  Summary: Chrysler is recalling 1,364 windshield wiper modules, P/N 55077098aj, sold during the 2008 and 2009 calendar year for use as aftermarket replacement equipment on MY 2002-2009 Dodge Ram pickup trucks. These wiper module assemblies may be susceptible to water intrusion that could result in partial or complete loss of windshield wiper capability.

  Consequence: When the wiper system fails, the operator will have reduced visibility which could result in a crash.

  Fix: Dealers will replace the wiper module assemblies with vented wiper motor housings free of charge. The safety recall began on August 28, 2009. Owners may contact Chrysler at 1-800-853-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #09E009000 »

• POWER TRAIN:CLUTCH ASSEMBLY:PEDAL/LINKAGE Recall for 2009 Dodge Ram 2500

  • Recall Announced MARCH 10 2009
  • NHTSA Reference #09V078000
  • Number Affected 504

  Summary: Chrysler is recalling 504 MY 2009 Dodge Ram 2500/3500 pickup trucks heavy duty cab chassis with manual transmission and power adjustable pedal package. The clutch pedal connecting rod to the clutch master cylinder may separate from the master cylinder. This may not allow disengagement of the clutch when the pedal is depressed, which could result in unintended vehicle movement.

  Consequence: Increased stopping distance and engine stalling may occur increasing the risk of a crash.

  Fix: Dealers will replace the clutch master cylinder hydraulic system free of charge. The recall is expected to begin during April 2009. Owners may contact Chrysler at 1-800-853-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #09V078000 »

• STEERING:LINKAGES:TIE ROD ASSEMBLY Recall for 2009 Dodge Ram 2500

  • Recall Announced JANUARY 09 2009
  • NHTSA Reference #09V005000
  • Number Affected 32,782

  Summary: Chrysler is recalling 32,782 MY 2008-2009 Dodge Ram 2500, 3500 and 3500 cab chassis pickup trucks equipped with powers and sons steering linkage. The steering linkage drag link inner tie rod to pitman arm ball stud may fracture. Also the steering linkage damper attaching the bracket may yield and shift on the linkage.

  Consequence: This could result in a loss of steering control and the restricted ability to turn the vehicle in one direction increasing the risk of a crash without warning.

  Fix: Dealers will replace the steering linkage drag link inner tie rod end assembly, and inspect the steering linkage damper bracket free of charge. The recall is expected to begin on or before February 16, 2009. Owners may contact Chrysler at 1-800-853-1403.

  For detailed information & supporting documents, see the official NHTSA page concerning recall #09V005000 »