1983 DODGE ARIES -- Front suspension crossmember may corrode and fail at lower control arm rear pivot mounts if operated where salt is used to aid in snow removal.

Control arm could detach from the crossmember, adverselyaffecting directional stability, which could result in an accident.

Install attachment reinforcement brackets to prevent control arm detachment as a result of corrosion weakening. For detailed information & supporting documents, see the official NHTSA page concerning recall #89V052000 »

1983 DODGE ARIES -- Location of hydraulic brake tube to both rear wheels causes interference and chafing between the tubes and rear suspension trailing arm pivot brackets.

Dealer will inspect rear wheel brake tubes and reroute to ensure proper tube to pivot bracket clearance. Any damaged tubes will also be replaced. For detailed information & supporting documents, see the official NHTSA page concerning recall #83V060000 »

1983 DODGE ARIES -- Hydraulic brake tubing routed to the left rear wheel brake system may have been bent out of shape during assembly and could chafe against the exhaust system hanger bolt.

Dealer will inspect and relocate tube, if necessary. A retaining clip will be installed to ensure adequate clearance for the tubing; any damaged tubes will also be replaced. For detailed information & supporting documents, see the official NHTSA page concerning recall #82V123000 »

1983 DODGE ARIES -- On the involved vehicles, improper routing of the hydraulic brake tube could cause it to chafe against the park brake cables. Eventually, the brake tube may fail and brake fluid leakage may occur.

Dealer will reroute the hydraulic brake tube, if necessary, without charge to owner. For detailed information & supporting documents, see the official NHTSA page concerning recall #82V085000 »