1981 DODGE ARIES -- Front suspension crossmember may corrode and fail at lower control arm rear pivot mounts if operated where salt is used to aid in snow removal.

Control arm could detach from the crossmember, adverselyaffecting directional stability, which could result in an accident.

Install attachment reinforcement brackets to prevent control arm detachment as a result of corrosion weakening. For detailed information & supporting documents, see the official NHTSA page concerning recall #89V052000 »

1981 DODGE ARIES -- The automatic speed control switch may stick in the "resume" position restricting return movement. This will not allow the normal brake pedal operation to deactivate the system.

The shield portion of the "resume" slide lever in the speed control unit will be replaced without charge. For detailed information & supporting documents, see the official NHTSA page concerning recall #81V111000 »

1981 DODGE ARIES -- The stop lamp switches installed on the subject vehicles may have inadequate internal switch contact pressure due to an incorrect formation of the switch contact terminals. This lack of switch contact continuity may render the (stop) brake warning lights inoperative.

The stop lamp switches on all involved vehicles will be replaced and properly formed terminals will be installed at no cost to owner. For detailed information & supporting documents, see the official NHTSA page concerning recall #81V093000 »

1981 DODGE ARIES -- Brake fluid may contain an excessive amount of water. This can cause degradation of braking performance or brake failure under a variety of circumstances.

Existing brake fluid will be removed from brake system and brake system will be refilled with fresh brake fluid. For detailed information & supporting documents, see the official NHTSA page concerning recall #81V021000 »